My Post-Apocalyptic Shelter Levels Up Infinitely! - Chapter 93

[Chapter 92 Concentrate on learning and get started with forging!]

The powerful error correction function and the hints given are more professional in Soma’s eyes than the masters who have been immersed in this way for many years.

The pictures and texts are abundant, and you can watch it repeatedly. If you can’t learn anything in this situation, you should find a piece of tofu and kill it!

“It turns out that the 15% description of this excellent quality does not mean that there is a 15% chance of finding mistakes and correcting them, but it means that the original level can be improved by 15%!!”

“Maybe 15% is for ordinary people. , it can’t have an immediate effect, but for those who are already at the peak in the field, or an eighth-level fitter! This is a super artifact!”

“If Dad is here, I can have this treasure, oh”

thought After the LCD TV was subsequently upgraded to a more terrifying level, with a more powerful error correction ability, Somo suddenly became restless!

After switching the lens and aiming the lens at the workbench, Soma poured a large mouthful of nether energy water to restore his energy, and took the mechanical arm to start the operation.

Start with the easiest way to make an iron axe.

Take out the iron block and put it on the work table. According to the previous order, in about ten minutes, the iron axe is brand new!

It is a pity that this iron axe is still at the level of no entry, and it has only reached the excellent level because of the attribute quality bonus of the workbench.

The two special abilities that come with it are also common sharpness bonuses, and there is nothing surprising.

After removing the robotic arm and putting the worktable on standby, Soma walked back to the living room, sat on the stone bench and started to replay the production process just now.

The 12-minute video started to play slowly after a slight lag.

In the picture, aiming at the front of the workbench, Soma sat down and began to wear the work arm.

“Hey, was I wrong from the beginning!”

Su Mo looked at his figure in the picture curiously, sat down with the figure in the picture, and sat down with the same virtual figure next to him, and the screen began to play in split screen.

One after another, red silk threads rose from the ground, went all the way to the top of the head, and scattered from the top of the head, spreading all over the limbs.

Compared with Soma’s posture, the illusory figure on the side can feel a complete difference in spirit.

A series of words began to appear in the two pictures, Sumo looked at it intently, and said in his mouth:

“Forging. Empty leading strength, head straight, body straight, strength lifting spirit.”

“Neck erect and relaxed, look forward to. Looking at the center without losing sight, stiffness and softness are the disadvantages, so you can practice neck exercises with ease!”

A few simple sentences express the truth of the firmness, and the two figures in the picture also begin to look at the iron in front of them. block, looking for split routes.

Because of the unaligned head and neck, Sumo was stunned to find that in the third perspective, there was a big problem with his initial cutting.

The figure on the right is cut straight and positive, but it has an arc of about 10 degrees, and it is not cut vertically.

“The elbow joint should be loose and avoid stiffness, and the flexion, extension and rotation are suitable. The elbow is straight and the arm is like a steel rod. The elbow movement is flexible and versatile.

” It’s done, the force is sent from the spine to the Governor’s channel.” During the

calcining and beating, the figure on the left, because of the elbow and the back, the point where the hammer fell was unstable, and it went to the left and went to the right.

The figure on the right is very uniform. Although his strength does not seem to be large, he can knock around a point every time.

As the production process slowly moved backwards, the gap between the two stone axes presented on the table became larger and larger.

The surface of the axe made by Soma himself can be seen to be uneven, even if it is calcined and beaten, it is still rough.

Although the one on the right is not very sophisticated, in terms of the overall shape, it is not one or two points that is good!

“Is there such a big gap between me and the entry-level craftsman? Once I make such a big piece, I can’t even be considered an entry-level!” He

touched the sweat on his head and sat in the living room, and Soma played it again. Production process.

This time, Su Mo focused his attention on the teaching figure, and watched the movement of the figure.

Sometimes hammer shadows fly, sometimes even cutting and grinding.

For this kind of craftsmanship, thanks to the compulsory education in the earth age and the earnest teaching of Su’s father when he was a child, Suma’s attitude is very serious.

The 12-minute video is over, and Soma’s eyes are still fixed on the screen.

It was played again and again, but Su Mo didn’t know it. From the inside to the outside, all his thoughts were devoted to the simple production.

The figure in the picture is moving, and the figure imagined by Soma in his mind is also moving synchronously.

Every hammer, every fall, every cut, every movement, Soma made sure he took it all down.

Two times, three times. After playing it back and forth for as many as six times, Soma had to rub her sore eyes and stop playing.

After a while, when the screen played again this time, Soma’s eyes turned.

Instead of staring at the right, it went back to the left!

The left side, which had not seen any faults before, was full of loopholes in Soma’s eyes this time.

After reading it all over again, without taking a break, Soma sat directly in front of the workbench.

With a move of the right hand, the working arm naturally attached to the right hand. With the iron block placed on the table, Soma began to immerse himself in the production.

This time, if there are outsiders who can see Soma being made twice, they will definitely be able to exclaim.

A person’s back can reflect his mental state very well.

After sitting down, this time Soma’s lumbar spine was slack and upright, and there was no bending, slanting, rigid, or rigid like before.

The neck is loose and erect, the muscles are soft, and the head is naturally lifted upwards and the top is gently lifted, like a bowl full of water on the top of the head, completely free.

The cutting gear of the right-hand mechanical arm fell, and after contacting the iron block, it slowly fell, bringing bursts of sparks and rushing forward on the stone wall.

With this knife, Somoche is satisfied and at ease.

There is no sense of stagnation at all!

bang!

Axe-like iron block that was cut off = dropped in front of the workbench, reached out and pushed the remaining part aside.

Soma begins the second step of heat forging.

Under the high temperature, the color of the iron began to turn red, and it gradually reached the point where it could be forged.

Boom!

A hammer fell! Before the sound dissipated, the hammer shadows fell from the air one after another, and crazily landed on the surface of the iron block.

Every time he exerted force, Soma’s back was loose and erect, straight and straight, as if there was a force of upward and upward pulling, his elbows slumped and sagged, not stiff, not sluggish, not hanging, and flexed and stretched freely.

The hammer shadows splashed sparks again and again. Although they could not be as accurate as the figures in the video, under the deliberate control of Soma, they were as different as clouds and mud than before.

The more forging, the more confident Soma felt in his heart, and he put the forged hammer aside to cool down.

With a thought, he made a false move towards the air, and a bottle of nether energy water appeared in Soma’s hand.

After pouring it into his mouth, Soma spit hard at the red axe. After the high temperature met the water, bursts of white scattered out.

Take out the handle of the axe made before, press the axe up, and wait until the joints are glued together, Soma draws his attention and looks at the attributes of the axe.

[Iron Axe (Excellent)]

[Description]: An iron axe made by the entry-level craftsman “Suma”.

[Special Ability]: 1. Sharpness +2

2. When cutting down trees with hardness not higher than 5, there is a probability of generating a critical strike (ie, breaking)

Evaluation: Let’s be reckless! I know you want to hold it and yell “who else”!

Notice, there will be three chapters tomorrow! (Baring teeth!)

(End of this chapter)