Monster Factory - 819

Super biosynthetic material?

This seems to be very promising in special industries. In the civilian market, Ye Qing is not easy to judge, because just looking at the information introduction, you know that the synthetic price of this material must not be cheap.

Superconducting metals can only be used by themselves for the time being, and sophisticated aircraft are subject to strict domestic air control regulations and cannot be promoted in the domestic market. The bionic compound eye camera is currently most suitable for the second-generation phantom phone.

Look at it like this…

It seems to count, there is really only the first liquid printer drawn in the lottery, which is more suitable for launching as a new product.

“No, any new technology has an infinitely broad market space.”

“We just lack the creative thinking to discover their uses.” In the office, Ye Qing quietly knocked on his forehead to teach the monsters. “In 1930, DuPont of the United States synthesized man-made fibers from the laboratory for the first time. They lasted four years. Upgrade this man-made fiber into a lightweight and wear-resistant material.”

“Nine years later, this man-made fiber named’nylon’ began mass production, and it became an indispensable nylon product for industry, and nylon stockings that made women crazy. Then DuPont became the world’s largest Chemical companies.”

“We now have super biosynthetic materials, liquid printers, and superconductor technology. There is no reason to make products that make people around the world crazy.”

Ye Qing did not believe in this evil, and continued to add to the monsters: “Food, clothing, shelter, transportation, this is a topic that humans in the world can never leave, and it is also the largest category of economic systems in the civilian market. In the 21st century, human living standards have improved. A word of’play’ should be added.”

“Food, clothing, shelter, transportation, and play, we don’t touch this piece of food. The remaining points, by the way, have medical and health care.”

“We will think of a way to develop a product around these points.”

“Boss, new products are easy to develop, but what you want is an innovative product that can sweep the world.”

“Even if I have an IQ comparable to Einstein, I can’t figure it out in less than ten days and a half.” The opposing Dianjing made a brainstorming action. If only talking about new products, without considering the market potential, then Dianjing can come up with a thousand kinds.

“You guys, iron bumps in your head.” Ye Qing sighed with hatred for iron failure. They are monsters, and their way of thinking may be different from that of humans.

“Let’s go ahead and make samples of liquid printers, bio-fiber materials, and compound-eye cameras first. Let me see what is so special about these two black technologies. Then we can design new products based on the samples. ”

“Superconducting metals and sophisticated aircraft will be placed in the second echelon first.”

“The meeting is over!”

…

At four o’clock in the morning, the hard-working monsters immediately started with the latest black technology blueprints.

Liquid printers are in charge of delicate masters. This kind of equipment can print special liquid materials into solid products of any shape within the size. Its industrial technology is not too complicated, at least in the eyes of the masters.

It has three sets of sizes, distinguished by the printing space of the workbench.

The first type can print up to 0.3 cubic meters, the second one is one cubic meter, and the third is five cubic meters. The last one is obviously for industrial use, so masters of ingenuity choose the second one.

Its core components are two high-precision material nozzles.

For ordinary 3D printers, the material nozzle is actually a simple three-axis machining head, which consists of a horizontal movement axis, a longitudinal movement axis, and an up and down movement axis. This kind of processing head is more common in the field of industrial processing than cheating beautiful women on the Internet.

The nozzle is a 3D printer, and the drill is an engraving machine, or a CNC milling machine.

The technical difficulty is zero, and Ye Qing can build a guide rail by himself without reading any instructions. Even some family-style workshops can assemble and produce.

However, the material orifice of the liquid printer is five coordinates.

The five-axis material nozzle is the core spindle processing head of the five-axis linkage machine tool. A five-axis linkage machine tool has only one processing head, which can process a variety of complex curved surfaces, and is the “Crown” level equipment in industrial processing. Even today, Huaxia still cannot gain a firm foothold in the field of five-axis linkage machine tools.

Now there are more than 600 five-axis machining centers in the Longxitan underground base, all of which are foreign brands.

Is it difficult to make a five-axis machining center the size of a computer desk?

Is it difficult to install a set of processing heads in this suitcase-sized machining center to make it a dual five-axis linkage?

It’s hard to go to heaven!

There is a defect in the spindle of all five-axis machine tools. It is the main shaft that drives the processing head. When turning, it can only rotate 270 degrees at the maximum. This is an inevitable result of the mechanical structure design, just like humans cannot twist their necks 360 degrees.

However, the complex surface is sometimes so complicated that it requires a 360-degree maneuver of the main shaft.

In the case that the main shaft cannot do this, the top-level machining centers can support the flipping of the fixtures of the fixed parts, so that the parts can change positions to achieve a 360-degree processing effect.

This fixture is flipped, like a double five-axis. But it’s just similar. It should be called a two-axis NC workbench, and a more advanced one is called a three-axis multiple workbench.

As for the real five-axis linkage workbench, Ye Qing has only seen it in the Longxitan factory.

At present, the giant animal industry wants to manufacture a material nozzle with dual five-axis dual linkage in an equipment the size of a standard computer desk. Even if Demaggi, who supplied the most processing centers in the underground base, and all engineers from Yamazaki Mazak came, there was nothing he could do.

With the drawings, the master craftsman can process them according to the drawings.

The synthesis of bio-fiber materials and three special liquid materials for liquid printers is done by the materials master, the exquisite master and the metal expert.

There is no difficulty in the formulation of the three liquid printing materials. With the production process, let alone the material master. Many top chemical companies outside can also synthesize them, so the formula must be kept strictly confidential here.

But the complexity of bio-fiber materials can make mankind desperate!

Material masters describe this super material with spider silk-like toughness and lightness.

But in nature, even the toughest spider silk spit out by black widow spiders has many fatal flaws. For example, it is very sticky, whether it is in natural evolution, in order to stick to the prey with a web, or the characteristics of the spider silk itself, it is sticky anyway.

There is also a short life span. Spider silk is a protein fiber. When exposed to the air, it will gradually lose its strength as the protein is decomposed.

The seventh-stage biofiber materials will inevitably not have these defects, which means that it is several times more difficult than the current research on the popular synthetic spider silk technology.

The difficulty lies in the materials. These synthetic materials can actually be purchased from chemical companies and biopharmaceutical companies. The most expensive raw material used here is artificial protein.

Its difficulty is the same as that of a plasma battery and requires a super device.

-High-energy ray mutagen.

This is a device that uses a super-strong magnetic field to generate a module and a high-purity radiation source. It can induce changes in the biological genes in the belt synthesis material through a special frequency, so that it can be transformed into a kind of protein synthetic fiber similar to spider silk.

The principle of the equipment is somewhat similar to the currently popular space breeding technology and gene transcription technology. People use rockets to send seeds into space, so that the high vacuum of space, high cosmic energy ion radiation, and cosmic magnetic field irradiate the seeds to induce the seeds to mutate.

The equipment is not technically difficult in theory, because the technological drawings of Monster Factory often echo the upper level.

In the sixth stage, the monster workers have already created a strong magnetic field generator to synthesize single crystal metal. Now the radiation source can also be purified from uranium ore.

The system automatically instills the operating system, so there is no need to worry about how to program and control these high-energy rays.

But the current situation is that the power of the magnetic field generator is not enough!

If you want to make a magnetic field generator that meets the requirements, you must use superconductor metal…

Fortunately!

Fortunately, bio-fiber materials are divided into three quality levels.

For the lowest level three material, simply modify the existing strong magnetic field generator and add a radiation source.

The factory is now secretly purifying weapon-grade enriched uranium to be used as fuel rods for the humpback whale.

It only needs to re-manufacture a set of containers and put high-purity pellets as required to serve as a radiation source. Therefore, the first to be manufactured is the lowest-grade bio-fiber material.

The next day.

Ye Qing suspends notification of the company’s new product content. Subsequently, the company’s procurement department purchased key raw materials from a large biopharmaceutical company in Shanghai.

In the factory, the strong magnetic field generator has been modified, and the radiation source is already in place.

At 7 o’clock that night, the material master sent the prepared synthetic materials to the workbench, ready for the first synthesis.