Monster Factory - 1211

When a diamond arrives in the hands of a jeweler, it is a gimmick treasure marked “diamonds forever”, which can drain a man’s pockets.

But in fact, apart from the “jewelry” attribute, diamond planing has few other uses.

In terms of industrial technology, natural diamonds are rarely useful.

Because almost all the places that need it to appear, they are replaced by synthetic diamonds.

The industrial technology of using high-energy lasers to vaporize diamonds and vapor-deposit them on the display is regarded as the first in the industry, and it is also regarded as the industrial use of diamond ore to find a new job.

Different from the previous technology of coating on the dream display, the transparency of the coating after the rough diamond is vaporized is enough for the dream display to obtain a sufficiently excellent imaging effect.

The imaging lens body of the holographic glasses is only the size of a matchbox. If the imaging lens body the size of a matchbox allows users to obtain the same viewing angle as in the real world, the coating technology must be improved and further improved.

From the very small, the magnification to the tens of millions of times the maximum, and ensure that the user does not observe any fuzzy pixels.

This can only be ensured if the mirror body becomes so transparent and flawless that the naked eye cannot observe its existence.

“We need diamonds of higher purity so that we can save more time for purification after gasification.” The master of exquisiteness shrugged his thin shoulders and handed Ye Qing the rough diamond information currently in stock at the factory. The quantity of ultra-high-purity rough diamonds supplied by Asia is far from enough.”

“Boss, we must find more sources of supply.”

“Are you asking me to start a jeweler’s sideline?” After reading the data on the raw diamond ore stocks in the factory, Ye Qing suddenly felt dizzy.

There are a lot of rough diamonds in stock, but among these rough diamonds, WS1 rough diamonds belonging to the third standard grade are only less than 300 grams.

As long as all gem minerals are attached with commercial attributes, purity is often the most fundamental element that determines its commercial value.

Things are precious, and pure gems are scarce in nature.

It is the same as jade, jade, and gems.

Rough diamonds of the same size often distinguish their value by purity. The purer the diamond, the more it can win people’s hearts, and the rarer it is.

The International Diamond Agency divides diamond grading standards into eleven purity grades.

Diamonds below the SI2 grade basically have no commercial circulation value, and their use is only as a diamond abrasive.

The SI2 grade diamond means that there are small other mineral impurities inside the diamond, and it is only suitable for polishing into broken diamonds for jewelry decoration.

The grades of rough diamonds for squeezing men’s pockets are often in the four grades of VS2, VS1, WS2, and WS1.

Diamonds of these grades, other mineral defects inside, can only be found through a high-power magnifying glass. These rough diamonds are cut and polished to make a diamond ring, which can show a dazzling colorful luster under the light.

It is these colorful lusters that fascinate the hearts of many beautiful women.

Further up, there is an IF level suitable for making precious jewellery.

The standard limit of diamond purity is FL level.

The highest grade is also known as a flawless diamond. This means that even under a super-high magnification magnifying glass, the inside of this diamond is flawless, without any mineral impurities.

In the past, the diamond raw materials imported by Behemoth Industry from Nigeria were all high-quality diamond raw materials above the WS2 level.

These fine diamond raw materials, even under the careful screening of a ten-fold magnifying glass, it is difficult to find the internal mineral flaws.

Use this diamond material to coat the dream display, which can be used directly.

Now coating holographic glasses, even the WS1 grade is not up to standard. The minimum standard is also the second IF level in the purity ranking list. And before the coating is made, it must be purified to remove all other mineral impurities even at the nanometer level.

The cruelty and extreme nature of industry is often reflected in these seemingly trivial details.

Coating the lens body of holographic glasses, even if it is only a nano-scale mineral defect, is plated on the surface of the lens body.

When the user puts on the holographic glasses and experiences the virtual world with a 180-degree perspective, the flaw will be magnified tens of thousands of times and become a visual stain of a few tenths of a millimeter.

Perhaps a stain of a few tenths of a millimeter will not affect the user’s visual experience.

But who can do that, fortunately, there is only one flaw on a mirror body?

This probability is lower than that of the 100 million yuan prize.

If the purification standard is relaxed slightly, it will undoubtedly save a lot of purification process and reduce the rough diamond grade to WS1.

But if you do this, the surface of an originally pure and flawless lens body will be covered with sheets of nano-scale mineral impurity particles.

When the user wears this kind of glasses to experience the virtual world, there will be slight chromatic aberration, and a piece of fuzzy visual spots that are not obvious but lingering.

In terms of processing efficiency, only the second-ranked IF-grade rough diamond is qualified to be the coating material for holographic glasses.

However, the current situation is that fine diamond raw materials above WS2 are already scarce.

Now even if General Mopu of Nicaya controls the entire western territory, the three diamond mines in the territory produce less than 30 grams of IF-grade rough diamonds every day.

Not to mention the rare FL extreme purity rough diamonds of Morningstar.

The higher the purity, the less time it takes to further purify the diamond ore after gasification in a vacuum environment, and the less raw material waste.

Because of the scarcity of IF-grade rough diamonds, the only way in the factory is to allow the masters to carefully mark the internal flaws of the WSI-grade diamond ore under a high-power microscope. Finally, these flaws are cut and separated from the ore to obtain small fragments. FL grade rough diamond.

This is a meticulous and time-consuming manual work. Diamond is the hardest material in the world. Is it easy to cut it accurately?

“Boss, I think even if it is a sideline business in the jewelry business, it can’t meet our needs.”

The exquisite master is serious, “We need a large amount of IF grade ore, preferably FL ultimate purity ore. I asked General Mopp who was responsible for supplying us, and they said not to mention Niagaya, even the entire European diamond jeweler. , I don’t have the ability to produce more than 500 grams of IF grade diamond ore.”

“You can’t help me like that.”

“Synthetic diamonds are of unusable purity at all.”

Ye Qing was a little embarrassed, “As for searching for IF-grade ore, it is obviously not something that can be solved with money. No, let’s expand the purchase of WS1-grade diamond ore first.”

“We can only waste some man-hours first and cut these rough diamonds to remove impurities and turn them into more pure broken diamonds.”

“We can ask those jewelers to hand over the stock of the bottom of the press box.” The master craftsman raised his eyebrows with a strong look in his eyes. “I heard people say that these jewelers have hidden a lot of WS1 rough diamonds in the bank vault. , Even a few rough diamonds of FL ultimate purity are hidden.”

“They stock these rough diamonds to increase the price of the international diamond market. If these stocks are brought to the factory, they can alleviate the current shortage of raw materials.”

“Do you think they will sell?” Ye Qing knew that Master Qiao had far underestimated the greed of capital merchants.

If they know that the Giant Monster Industry urgently needs a large amount of ultra-high-purity diamond ore, they will not take advantage of the fire and raise the price of the raw materials several levels.

The exquisite master smiled, and replied in a way different from ordinary people, “It’s just right, they rushed to the fire and robbed us, so we went the other way, robbed the diamonds and didn’t pay.”