Magic Industry Empire - 414

“President, actually about the new type of magic machine… Whether it’s the Magic Research Institute or our Magic Machine R&D Center, there have already been some more mature ideas. But in terms of specific research and development, they encountered one A very important problem, and it is almost impossible to solve…”

Seeing Camby’s embarrassed look, Xu Yi didn’t even think about it, and immediately interjected: “It’s a material problem, right?”

Camby was startled, and hurriedly replied: “Yes, it’s a material problem. President. Your requirement for the new magic machine tool is mainly to increase the power of the magic machine tool. I understand your idea. You want to rely on a higher specification magic machine tool. To build a more powerful magic machine.”

“Yes, if the specifications of the magic machine tool are too low, we will be restricted if we want to manufacture large magic machines. Therefore, we must first solve the problem of the magic machine tool.” Xu Yi nodded.

Camby smiled bitterly: “However, after the various powers of the magic machine tool have been improved, the requirements for materials have become much higher. For example, when we developed a new medium-sized magic stamping machine some time ago, the machine tool could only withstand no more than After 10,000 punches, serious cracks will appear and work cannot be continued.”

“Ten thousand times?” Xu Yi frowned. “This is too little, right? Didn’t you think of other ways to alleviate it?”

“I thought about it, such as covering the outer layer of the magic machine tool with soft mud to offset the vibration force and slow down the impact on the machine tool, but the effect is not obvious.” Camby sighed. “In the final analysis, if you want to achieve the due stamping effect, then the machine tool itself must withstand the corresponding pressing force, which cannot be avoided. So in the final analysis, only the problem of the material itself of the casting magic machine can be solved.”

Xu Yi also gave a wry smile: “There is no way, I can’t do anything about this problem. Material research is something that can’t be rushed, and there is no shortcut.”

Every time I discuss material issues with Camby and others, Xu also regrets that when I was on the earth, I didn’t learn more about material science, so that I couldn’t rely on the earth’s experience to promote the new flying business association here. Development.

However, the materials are extensive and profound, even if Xu Yi had this idea at the time, I am afraid that he would not have the time.

Now he can use his mechanical engineering knowledge to build a new flying business association in Bangta City in just over three years. It can’t be said that this is wrong.

In the final analysis, the industrial system is extremely complex, and it is far from being able to completely handle it by himself.

“Fortunately, we already have many types of non-ferrous metals. As long as we do more research, I think we can always achieve breakthroughs in material research and find the right alloy to build this kind of magic machine tool that needs to resist strong impulse.” Xu Yi comforted Camby Road. “As for now, let’s do research under limited conditions.”

“It can only be so.” Camby nodded, but immediately became excited again. “But President, the research on the new magic machine tool is not all bad news.”

“Oh? So there is still a breakthrough. Tell me, in what way? Is it the fast-moving problem of the magic lathe you mentioned last time, or the precise positioning of the magic punch last time that Portroux said problem?”

“These are all small problems, why would I specifically report to you?” Camby shook his head and said with a smug expression: “Actually, you have mentioned countless times before, the automatic control of the magic machine tool. .”

Xu Yi was stunned, and then he was astonished: “No? Is it the self-control magic machine tool you developed? How is this possible!”

“Hey, just follow me to see it.”

Xu Yi followed Camby to the actual operating workshop of the Magic Machine Tool R&D Center with an incredible face, and saw a brand-new magic machine tool standing in the middle of the workshop. The dwarf Portroux was holding a one-meter square steel plate. put in.

“Wait, Portroux, let the president take a look.” Camby called Portroux aloud.

Portrou looked up at Xu Yi and stopped his movements. After Xu Yi and Camby came to the side of the magic machine tool, they used a slower movement to push the steel plate into one of the magic machine tools. In the card slot.

The steel plate happened to be placed in the card slot, and Portrou pressed a button on the magic machine tool, and then stepped back two steps, indicating that he did not intervene at all.

Xu Yi saw that the magic machine started automatically and sent the steel plate in the card slot out, and then a semicircular corner was cut off by a slice.

After completing this process, the card slot of the magic machine automatically turns the steel plate in a circle, and moves to the side of the slice again, and the semi-circular corners are also cut off.

Repeat this several times. After all the four corners of the steel plate are cut, the card slot drives the steel plate to sink again, and then it is divided into two ends to clamp, and then, driven by the two iron clamps, it is slightly folded upwards slightly. After bending, it was sent out again by the card slot.

Xu Yi glanced at this hugely changed steel plate in amazement, then looked at this magic machine tool, and his emotions instantly became slightly excited.

That’s right, although the actions are still very simple and the processes that can be completed are relatively simple, the entire control of this magic machine tool is completely automatic without anyone intervening!

This means that as long as the research is further deepened in the future, there may be automatic magic machine tools comparable to the CNC machine tools on the earth on the Sainz continent!

Xu Yi took a breath, suppressed the excitement in his heart, and signaled Portrou to feed the steel plate into the magic machine again.

Portru continued to do so, and Xu Yi saw that the steel plate was processed through the same process again before being sent out.

Xu Yi put the two steel plates together and compared them, and was surprised to find that the two steel plates were exactly the same!

He even asked Camby to bring a vernier caliper to measure, and found that the error did not exceed 0.1 mm!

Although this is far behind the high-precision CNC machine tools on the earth, it is already very amazing for the industrial level of Sainz mainland.

Xu Yi asked Portru to repeat the operation several times. Finally, after comparing the processed steel plates, it was found that the maximum error of the various parameters of these steel plates did not exceed 0.2 mm.

“Awesome!” Xu Yi couldn’t help yelling loudly, then patted Camby and Portrou on the shoulders, and said excitedly: “You have done a great job! With this thing, the production efficiency of our Chamber of Commerce It will be greatly improved, and I don’t have to worry about productivity! Haha, great! I want to commend you on behalf of the Chamber of Commerce! I decided to remember…”

“Wait!” Camby suddenly interrupted the excited Xu Yi. “Sir President, it is not us who made this automatic magic machine, but Sancheli. If you want to give rewards, you should give him priority.”

“Sancheli?” Xu Yi was stunned for a while, and then dug out the person corresponding to this person’s name from the depths of his mind. “It turned out to be him, no wonder…”

Since the last time a breakthrough in magic programming technology was revealed on the magic fountain in the New Municipal Plaza, Sancheli has not had any new research results for nearly two years, so that Xu Yi almost forgot about this person.

Unexpectedly, Sancheli jumped out without warning on this automatic magic machine tool that made Xu Yi so excited and could solve the factory capacity problem that had plagued him for a long time.

Xu Yi was stunned for a while before asking Camby: “You mean, this automatic magic machine tool Sancheli is also involved in research and development?”

“It is not very accurate to say that he was involved. To be precise, he first proposed the idea of this automatic magic machine tool.” Camby replied. “If it weren’t for him to tell us that we can set up in advance through magic, and let the magic machine tool automatically complete some set actions, we would never have thought of this. And the most important automatic control magic array on this magic machine tool was done by him. , So I think the biggest hero should be him.”

“Well, we just changed the structure of the magic machine accordingly, which is nothing. It is far behind the self-control magic circle he solved. This is also the meaning of the Magic Academy. I think it should be given to Sancheli. First work.” Porterlu also said.

Xu Yi thought for a while, but suddenly snorted: “Why didn’t anyone tell me in advance for such an important R&D? Even until today, you are about to successfully develop this automatic magic machine tool, so I don’t know? Are you right? Do you take me as the president in your eyes?”

Seeing Xu Yi’s gloomy face, both Camby and Portru were taken aback. Camby waved his hands vigorously and explained, “Master, don’t get me wrong. It’s not that we kept you from deliberately, it’s just Sanchee. Altruistic strongly request that we do not disclose it to you in advance.”

“Yes, Sancheli said that he has been in the Chamber of Commerce for several years, and has always felt very sorry for you. If this automatic magic machine is successfully developed, it can be regarded as a reward for you. But if the development fails, he feels even more shameless. Seeing you, so I dare not let you know at all.” Portroux explained the same.

“Huh, does it mean he has the face to see me now?” Xu Yi still looked unhappy. “Since he dare not take the initiative to see me, then I will not take the initiative to find him. You tell him for me, after the automatic magic machine tool is fully developed, I will give special commendations and rewards to all those who participated in the research and development. He. If you don’t show up then, don’t show up in front of me in the future!”

After dropping this sentence, Xu Yi turned around and left the Magic Machine Tool R&D Center.

However, only less than a hundred meters away, Xu Yi could no longer stretch the expression on his face, and laughed from the bottom of his heart.

Compared to how much money the Chamber of Commerce makes, he will always be more willing to see the breakthroughs made by the Chamber of Commerce in technology research and development.

Among all the technical research and development, he attaches great importance to the technical research and development of the magic machine tool, which is the most common but most demanded thing in the industrial system.

Prior to this, the development of automatic magic machine tools was only an idea in his mind, because he knew how difficult the research of magic array pre-programming technology was, so he had always been patient with Sancheli.

But now, Sancheli secretly cooperated with the Magic Academy and the Magic Machine Tool R&D Center to successfully develop an automatic magic machine tool!

No matter how rudimentary this automatic magic machine tool is, how far is the gap compared to those high-precision CNC machine tools on the earth, but this represents the first step in this area of research by the New Flying Chamber of Commerce.

As long as we persist in research and development in the future, we will catch up with the standards on the earth step by step.

How could Xu Yi not feel extremely happy when he heard such a great news?